500/510 Series and 500/510 Series with Service Seal

High efficiency clamps offer long life in most soils and atmospheres. Available in single-section Full Seal® style (500 Series), two-section Xtra Range® style (510 Series) and Servi-Seal® style with welded-in service outlet in both single and double section. Each clamp size can accommodate a wide range of O.D. variations.

• • • Designed for optimum length and the most efficient gasket load per square inch, allowing effective sealing to within 1” of either clamp edge. Standard lengths from 6” to 30” 
    • Exclusive HYMAX lug design of lightweight, strong ductile iron is E-coated as a rust inhibitor. Drop-in style lugs are self-aligning to provide uniform transfer tightening force along the full clamp length. They locate pulling force close to the pipe surface for easy tightening without bolt bending
    • Corrosion-resistant alloy steel lug bolts and nuts have service life expectancies compatible with the rest of your system; stainless steel optional 
    • Captive bolts have deep, non-galling, spin-fit threads. Heavy shoulders prevent turning in lug, and heavy hex nuts provide more thread contact for strength 
    • Extra long “starter” bolt and nut on each lug eases installation
    • Stainless steel gap bridges, recessed and molded into the gasket where band sections join, add support to provide 360 degree clamping pressure 
    • Specially compounded rubber gasket has a gridded pattern for positive sealing. Tapered ends make installation quick and easy 
    • Optional bonding device is available to maintain electrical continuity across clamp band. 
    • Optional add-on feature allows clamps to be joined over a longer than normal pipe length. 
    • Sizes from 2” to 12” (4” to 36” 510 Series)

• Maximum working pressure: 300 PSI for 500 Series 2”-8” and 200 PSI 10” & 12” (300 PSI 510 Series 4”-8”, 200 PSI 10” & 12”, and 150 PSI 14”-36”)